病原微生物检测车

Pathogen detection vehicle

1、功效及用途

1、Function and purpose
       病原微生物检测车具有较强的无邪性和情形顺应性
，主要用于地动、洪水、火灾、台风、千旱、冰雪等重大自然灾难灾区现场情形、前言生物、饮用水、食物等样本的病原学和卫生学指标检测
，重大突发公共卫生事务和大型运动包管生物清静方面的现场检测需要
。主要为各地疾控中心提供无邪检测效劳
，湖北疾控中心的检测车就是公司手艺团队研爆发产的
，为新冠肺炎疫情的防控助力;
       With strong mobility and environmental adaptability, the vehicle is mainly used to detect the pathogens and hygieneindexes of the samples of the environment, vector organisms, drinking water and food in the disaster areas caused by majornatural disasters, such as earthquake,flood,fire, typhoon, drought,snow and ice.Major public health emergencies and large-scale activities to ensure the biosafety of on-site testing needs.It mainly provides mobile detection services for centers for disease control and prevention. The detection vehicle of hubei center for disease control and prevention was developedand produced by the technical team of the company to assist in the prevention and control of covid-19 epidemic.

2、切合以下设计标准要求

2、Meet the following design standards

GB19489-2008       《实验室生物清静通用要求》

wS233-2017         《病原微生物实验室生物清静通用准则》

GB 50346-2011      《生物清静实验室修建手艺规范》

GB1589-2016        《蹊径车辆外廓尺寸、轴荷及质量限值》

GB 7258-2017       《无邪车运行清静手艺条件》

GJB5113-2012       《后勤箱式车通用规范》

ISO 1590: 2003(E)  《医学实验室一清静要求》

wHO《实验室生物清静手册》

3、主要组成

3、Main components
       主要由底盘、裙边箱、保温隔热箱体、空调送风净化系统、电气系统、控制系统、车载型生化实验装备、灭菌装置和实验台等组成
。

lt is mainly composed of chassis, hemline box, heat insulation box, air conditioning air purification system, electrical system, control system, vehicle-mounted biochemical experimental equipment, sterilization device and experimental bench.

4、主要手艺指标

4、Main technical indicators

4.1、事情情形要求

4.1、Requirements of working environment

产品应思量日照、雨雪和风砂等天气的影响
，箱体在下列情形下应能正常事情
，不得有脱层、变形或损坏
，密封条、密封剂不应失效
，不应泛起镀层脱落及显着侵蚀等
。

事情情形温度: -25℃~+46℃
，顺应我国严寒地区、严寒地区、夏热冬冷地区、夏热冬暖地区和温顺地区五个典范地区
。贮存极限温度:-40℃~+60℃;

箱体内所有零、部件均应具有顺应相对湿度95%情形条件的能力
，金属件不应锈蚀
，涂层不应破损;

可遭受地面稳固风30m/s以上;

车外装备及整车应能遭受强度为不小于1120W/m'的太阳辐射
，外外貌质料应能遭受稳态恒久自然光化学效应
。

The product should consider the influence of sunshine, rain, snow and wind sand and other climate, the box body shouldbe able to work normally in the following environment, there should be no delamination, deformation or damage, seal strip,sealant should not fail, should not appear coating off and obvious corrosion.

Working environment temperature: -25%℃ ~ +46C, suitable for China's cold region, cold region, hot summer and coldwinter region, hot summer and warm winter region and mild region five typical areas.Storage limit temperature: -40°℃~ +60°℃;

All parts and parts in the box shall have the ability to adapt to 95% environmental conditions of relative humidity. Themetal parts shall not be corroded and the coating shall not be damaged.

Can withstand the ground stable wind above 30m/s;

The external equipment and the whole vehicle shall be able to withstand the solar radiation with the intensity no lessthan 1120W/mt , and the external surface material shall be able to withstand the steady and long-term natural photochemicaleffects.

4.2、实验室功效参数

4.2、Laboratory function parameters

可移动的P2S实验室功效
，能有用开展种种样本的病原学和卫生学指标检测
，情形条件切合检测质量控制与生物清静的要求
。凭证国家行业标准
，实验舱内建设负压-25Pa;进入试验区的缓冲区必需是正压10Pa;

The function of portable P2S laboratory can effectively carry out the detection of pathogens and hygiene indexes of alkinds of samples, and the environmental conditions meet the requirements of detection quality control and biosafety.According to the national industry standard, negative pressure -25pa is established in the experimental chamber The bufferinto the test area must be positive pressure 10Pa;

部分实物照片见下:Some of the photos are as follows:

定制车载型生物清静柜、生化作育箱
，抗震耐颠更耐用
Bespoke vehicle-mounted biosafety cabinet and biochemical incubator, more durable against shock and shock